Description
UltraFloor Level IT Super Flex 30
UltraFloor Level IT Super Flex 30 is a flexible smoothing finishing compound that is rapid setting, fast drying and fibre-reinforced. The two-part system contains a blend of high-spec micro fibres, cements and graded fillers. The 5-litre bottle that comes with each purchase is a pre-gauged polymer liquid.
Specially designed to use with many different types of subfloors, Level IT Super Flex 30 can be used with the following floorings:
- Sand and cement
- Concrete
- Calcium sulphate, anhydrite or hemihydrate screeds
- Plywood – flooring grade
- Rigid steel
- Damp-proof membranes
- Underfloor heating systems
Super Flex 30 can even be used itself as a finished floor surface.
You can use Super Flex 30 for depths of between 2-10mm. As a rapid-drying product, you will be able to apply bonded floor coverings to internal subfloors within as little as one hour. When installing carpet, allow 45 minutes and for resin finishes allow 24 hours.
Features of Level IT Super Flex 30
- Foot traffic in as little as 30 minutes
- Apply bonded floor coverings after one hour
- Use over most common subfloors – this includes flooring grade plywood and rigid steel
- Ready to receive resin finishes after 24 hours
- Can accept fork-lift traffic after 24 hours
- Use as a finished wear surface
- UFH compatible
- Low odour
- Protein free
- Packaging: 20kg bag and a 5-litre bottle
Please note: UltraFloor Level IT Super Flex 30 is not a moisture tolerant formulation. Therefore, it is not suitable for pre-smoothing subfloors before applying a surface damp proof membrane (DPM) or a moisture vapour suppressant (MVS). It is also not ideal for applying where a damp proof course (DPC) is not present within the integrity of a building.
Reviews
There are no reviews yet.