UltraCrete RSC: Rapid Setting Cement 20Kg

£35.99 inc VAT

UltraCrete RSC: Rapid Setting Cement

Ultracrete RSC is a fast setting cement mortar, which when mixed with site aggregates, produces a rapid setting, early high strength mortar or concrete. This rapid set mortar has exceptional high performance and is suitable for a whole range of concrete and mortar applications where early opening to traffic is essential, such as cable box floors, signs, speed camera’s.

Comes in a 20KG tub or reinforced paper bag. Select your preference below.

We aim to offer the cheapest products online, if you find UltraCrete RSC Rapid Setting Cement anywhere else any cheaper please give us a call – ☎️ 0845 862 1099!

Clear

Bulk Buy Savings!

Buy 10 & save 10%
Buy 28 & save 20%
Buy 56 & save 30%

Pallet Deals also available!

How much will you need?

0
20kg Unit

Description

UltraCrete RSC: Rapid Setting Cement

Ultracrete RSC Rapid Set Cement, when mixed with aggregates, produces a fast setting, high strength mortar. It is ideal for use on cable box floors, road crossings, sign and camera bases, with the benefit for highways contractors that roads or pathways can be opened to traffic and pedestrians in just 1 hour.

Ultracrete RSC is supplied in 20kg reinforced paper bags or tubs and contains a mix of approved chemical additives, which accelerate the process of hardening once the product is placed in situ. When mixed with sand or sand/aggregates, RSC can be laid from 10mm-250mm in just one pass. Ultracrete RSC does not contain chloride, metallic aluminium, iron or carbon, which eliminates the problems associated with corrosion and or staining, meaning a clean, durable and lasting repair.

RSC Rapid Setting Cement can be mixed by hand or with a freefall mixer, the mixing proportions will ultimately vary depending on the design mix, to accommodate the strength needed and speed of set that is required for the repair. As a rough guide, the maximum size of the aggregate should not exceed one third of the thickness of the repair at its thinnest point. If RSC cement is bulked out with sand, the sand needs to be well graded, clean and sharp. However if bulking out with a coarse aggregate, you must ensure that it is clean and well-graded down from maximum.

Siliceous stone, granite or basalt chippings may be used for all applications. Please note that hard limestone should not be used in areas subject to acid attack.

Technical Data: 

  • High strength gain
  • Early open to trafficking
  • Workability: 10 – 15 minutes
  • Sets in 20-30 minutes
  • Compressive strength = up to 20 N/mm2 in 1 hour
  • Economical – mix with your own site aggregates
  • Size: 20kg bag or tub of extra rapid hardening cement

Typical Ultracrete RSC concrete design mix:

20kg RSC; 60kg clean 20mm concrete ballast; 8 litres of water (approximately) Note: Sand aggregates contain moisture. Do not add the entire measured amount of water in one go, add 50% initially then gradually add the remaining 4 litres if required.

If you require a copy of the technical data sheet, please do not hesitate to contact us on ☎️ 0845 862 1099!

Additional information

Weight 20 kg
Size

BAG, BUCKET

Reviews

There are no reviews yet.

Be the first to review “UltraCrete RSC: Rapid Setting Cement 20Kg”

Your email address will not be published. Required fields are marked *

You may also like…

  • 28litre Instarmac
    Mixing Bucket

    £11.99 inc VAT
    Read more
  • Ultracrete HF High Flow Precision Grout 25Kg

    £23.99 inc VAT
    Add to basket