(Open 8:30am – 5:30pm )Standard local call rates apply
£1,090.04 Ex. VAT - £1,308.05 Inc. VAT
UltraScape SlipBond is a contractor friendly, flexible cladding adhesive ideal for both internal & external use. Slipbond has been specially formulated with extended workability for fixing brick slips and natural stone to a wide range of substrates including sand/cement render, brick and block work. It can be used for both wall and floor applications, as well as with external and internal wall installation systems. Slipbond is also compatible with underfloor heating systems. This pallet offer is ideal for landscaping contractors and tilers working on large scale projects.
Coverage – 5m2 at 3mm depth, 20KG bag | Pallet Offer 56x 20Kg bags. Free standard delivery is included.
For queries or to speak to a member of our team, call ☎️ 0330 122 1025
Delivery & Returns Info
Delivery is calculated on size & weight of order, charges displayed when added to basket. Small orders via courier, larger orders via Pallet Network (Click & Collect available call 0330 122 1025 or 01827 794 350). Need further info, click here.
*Small additional charges may apply to certain parts of Scotland or areas with HGV Restrictions. Next Day delivery + £15 (*exc. apply – Full Pallets £80 on a Next Day Service)
Returns, cancel up to 14 days from date of delivery. Product to be returned in the same condition & packaging. No returns for cementitious & perishable products. You are responsible for returning goods to The Paving Experts. Need further info, click here.
UltraScape slipbond is a flexible cladding adhesive for both internal and external use. Slipbond consists of blended cements, graded fillers and additives and a high level of redispersible powder polymer. This flexible cladding adhesive is specially formulated with extended workability, for fixing brick slips and natural stone to a range of substrates. Including sand/cement render, brick and block work – and can be used for wall and floor applications as well as with external and internal wall installation systems.
UltraScape slipbond is a fully pre-mixed dry-pack which only requires the addition of water on-site. It can be applied to a thickness of 3mm-20mm up to 1m2 at a time. Ideal for use with Ultrascape Flowpoint Grout or Cempoint Pointing Mortar.
The preparation of the surface to be treated is of the greatest importance. Care must be taken to remove all loose material, debris, laitance, grease, paint and efflorescence. The concrete / masonry/ substrate should be thoroughly dampened with water. Any surplus water should be removed prior to commencing application.
UltraScape slipbond should be added slowly to 5.2 litres of clean water per 20kg bag and mixed thoroughly, ideally with a forced action mixer for 3 minutes to give a slump free easily worked adhesive. Once mixed the mortar is immediately ready for use and has a pot life of approximately 2 hours at 20°C. Mix only sufficient material to be used within the pot life, do not remix or re-wet.
Use a trowel to apply a layer of mortar on to the substrate with sufficient force to ensure a good bond. On large format stone it is advisable to back butter the stone unit prior to embedment. Once application of the mortar bed has taken place please ensure that the stone is applied within 25 minutes.
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
0330 122 1025 | 01827 794350 email@example.com