UltraCrete QC6 (Pallet Offer 56x 25Kg Bags). Free Delivery 🚚

Technical information

• Pre-blended in 25kg bags (plastic tubs also available)
• Contains special cements and a 6mm graded aggregate
• Simply add water to form a high strength rapid setting concrete, which, when set, dries to match most existing concrete surfaces
• Can be applied from depths of 12mm to 100mm, depending on application
• Do not use at temperatures below 5°C during application or initial set

How to mix QC6 Surface Reinstatement Concrete

• Either mix with a forced action mixer or by hand with an appropriate tool
• If hand mixing is used, ensure that it is vigorous
• 25kg of product will require approximately 2.75 litres of water
• A stiff consistent mix with no slump should be achieved, ensuring all particles are well wetted
• Mix only enough material to apply within 4 minutes
• Never remix or add extra water

How to apply QC6 Surface Reinstatement Concrete

1. Apply mixed material over a pre–soaked prepared area to a minimum of 10mm and a maximum of 100mm, within 4 minutes
2. Firm well into position using a float, paying attention to edges and thin sections
3. Level up to the surface and finish using a steel float or trowel to close up the surface and seal the edges